편집
715
번
바뀜
둘러보기로 가기
검색하러 가기
새 문서: # Autogenerated configuration file template ################################# # allow-axfr-ips If disabled, DO allow zonetransfers from these IP addresses # allow-axfr-ips...
# Autogenerated configuration file template
#################################
# allow-axfr-ips If disabled, DO allow zonetransfers from these IP addresses
#
allow-axfr-ips=127.0.0.1
#################################
# allow-recursion List of netmasks that are allowed to recurse
#
# allow-recursion=0.0.0.0
#################################
# allow-recursion-override Local data even about hosts that don't exist will
# override the internet. (on/off)
#
allow-recursion-override=yes
#################################
# cache-ttl Seconds to store packets in the PacketCache
#
cache-ttl=20
#################################
# chroot If set, chroot to this directory for more security
#
# chroot=/var/spool/powerdns
#################################
# config-dir Location of configuration directory (pdns.conf)
#
config-dir=/etc/powerdns
#################################
# config-name Name of this virtual configuration - will rename the binary image
#
# config-name=
#################################
# control-console Debugging switch - don't use
#
# control-console=no
#################################
# daemon Operate as a daemon
#
daemon=yes
#################################
# default-soa-name name to insert in the SOA record if none set in the backend
#
default-soa-name=ns.debianusers.org
#################################
# disable-axfr Disable zonetransfers but do allow TCP queries
#
disable-axfr=no
#################################
# disable-tcp Do not listen to TCP queries
#
disable-tcp=no
#################################
# distributor-threads Default number of Distributor (backend) threads to start
#
# distributor-threads=3
#################################
# fancy-records Process URL and MBOXFW records
#
# fancy-records=no
#################################
# guardian Run within a guardian process
#
guardian=yes
#################################
# launch Which backends to launch and order to query them in
#
launch=gmysql,
#################################
# lazy-recursion Only recurse if question cannot be answered locally
#
lazy-recursion=yes
#################################
# load-modules Load this module - supply absolute or relative path
#
# load-modules=
#################################
# local-address Local IP address to which we bind
#
local-address=211.115.117.35,127.0.0.1
#################################
# local-ipv6 Local IP address to which we bind
#
# local-ipv6=
#################################
# local-port The port on which we listen
#
local-port=53
#################################
# log-dns-details If PDNS should log failed update requests
#
log-dns-details=/var/log/pdns/pdns-err.log
#################################
# log-failed-updates If PDNS should log failed update requests
#
log-failed-updates=/var/log/pdns/error-updates.log
#################################
# logfile Logfile to use
#
logfile=/var/log/pdns/pdns.log
#################################
# logging-facility Log under a specific facility
#
logging-facility=0
#################################
# loglevel Amount of logging. Higher is more. Do not set below 3
#
loglevel=4
#################################
# master Act as a master
#
# master=yes
#################################
# max-queue-length Maximum queuelength before considering situation lost
#
max-queue-length=5000
#################################
# max-tcp-connections Maximum number of TCP connections
#
# max-tcp-connections=10
#################################
# module-dir Default directory for modules
#
module-dir=/usr/lib/powerdns
#################################
# negquery-cache-ttl Seconds to store packets in the PacketCache
#
# negquery-cache-ttl=60
#################################
# only-soa Make sure that no SOA serial is less than this number
#
# only-soa=org
#################################
# out-of-zone-additional-processing Do out of zone additional processing
#
# out-of-zone-additional-processing=no
#################################
# query-cache-ttl Seconds to store packets in the PacketCache
#
query-cache-ttl=20
#################################
# query-logging Hint backends that queries should be logged
#
query-logging=yes
#################################
# queue-limit Maximum number of milliseconds to queue a query
#
queue-limit=1500
#################################
# query-local-address The IP address to use as a source address for sending
# queries.
# query-local-address=
#################################
# receiver-threads Number of receiver threads to launch
#
# receiver-threads=1
#################################
# recursive-cache-ttl Seconds to store packets in the PacketCache
#
# recursive-cache-ttl=10
#################################
# recursor If recursion is desired, IP address of a recursing nameserver
#
recursor=127.0.0.1:5353
#################################
# setgid If set, change group id to this gid for more security
#
setgid=pdns
#################################
# setuid If set, change user id to this uid for more security
#
setuid=pdns
#################################
# skip-cname Do not perform CNAME indirection for each query
#
skip-cname=no
#################################
# slave Act as a slave
#
slave=yes
#################################
# slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds
#
slave-cycle-interval=30
#################################
# smtpredirector Our smtpredir MX host
#
# smtpredirector=a.misconfigured.powerdns.smtp.server
#################################
# soa-minimum-ttl Default SOA mininum ttl
#
# soa-minimum-ttl=3600
#################################
# soa-serial-offset Make sure that no SOA serial is less than this number
#
# soa-serial-offset=0
#################################
# socket-dir Where the controlsocket will live
#
socket-dir=/var/run
#################################
# strict-rfc-axfrs Perform strictly rfc compliant axfrs (very slow)
#
# strict-rfc-axfrs=no
#################################
# urlredirector Where we send hosts to that need to be url redirected
#
# urlredirector=127.0.0.1
#################################
# use-logfile Use a log file
#
use-logfile=yes
#################################
# webserver Start a webserver for monitoring
#
webserver=yes
#################################
# webserver-address IP Address of webserver to listen on
#
webserver-address=0.0.0.0
#################################
# webserver-password Password required for accessing the webserver
#
# webserver-password=
#################################
# webserver-port Port of webserver to listen on
#
webserver-port=5555
#################################
# webserver-print-arguments If the webserver should print arguments
#
# webserver-print-arguments=no
#################################
# wildcard-url Process URL and MBOXFW records
#
# wildcard-url=no
#################################
# wildcards Honor wildcards in the database
#
# wildcards=
#################################
# version-string What should PowerDNS return for version
# allowed methods are anonymouse / powerdns / full / custom
version-string=powerdns
include=/etc/powerdns/pdns.d
#################################
# allow-axfr-ips If disabled, DO allow zonetransfers from these IP addresses
#
allow-axfr-ips=127.0.0.1
#################################
# allow-recursion List of netmasks that are allowed to recurse
#
# allow-recursion=0.0.0.0
#################################
# allow-recursion-override Local data even about hosts that don't exist will
# override the internet. (on/off)
#
allow-recursion-override=yes
#################################
# cache-ttl Seconds to store packets in the PacketCache
#
cache-ttl=20
#################################
# chroot If set, chroot to this directory for more security
#
# chroot=/var/spool/powerdns
#################################
# config-dir Location of configuration directory (pdns.conf)
#
config-dir=/etc/powerdns
#################################
# config-name Name of this virtual configuration - will rename the binary image
#
# config-name=
#################################
# control-console Debugging switch - don't use
#
# control-console=no
#################################
# daemon Operate as a daemon
#
daemon=yes
#################################
# default-soa-name name to insert in the SOA record if none set in the backend
#
default-soa-name=ns.debianusers.org
#################################
# disable-axfr Disable zonetransfers but do allow TCP queries
#
disable-axfr=no
#################################
# disable-tcp Do not listen to TCP queries
#
disable-tcp=no
#################################
# distributor-threads Default number of Distributor (backend) threads to start
#
# distributor-threads=3
#################################
# fancy-records Process URL and MBOXFW records
#
# fancy-records=no
#################################
# guardian Run within a guardian process
#
guardian=yes
#################################
# launch Which backends to launch and order to query them in
#
launch=gmysql,
#################################
# lazy-recursion Only recurse if question cannot be answered locally
#
lazy-recursion=yes
#################################
# load-modules Load this module - supply absolute or relative path
#
# load-modules=
#################################
# local-address Local IP address to which we bind
#
local-address=211.115.117.35,127.0.0.1
#################################
# local-ipv6 Local IP address to which we bind
#
# local-ipv6=
#################################
# local-port The port on which we listen
#
local-port=53
#################################
# log-dns-details If PDNS should log failed update requests
#
log-dns-details=/var/log/pdns/pdns-err.log
#################################
# log-failed-updates If PDNS should log failed update requests
#
log-failed-updates=/var/log/pdns/error-updates.log
#################################
# logfile Logfile to use
#
logfile=/var/log/pdns/pdns.log
#################################
# logging-facility Log under a specific facility
#
logging-facility=0
#################################
# loglevel Amount of logging. Higher is more. Do not set below 3
#
loglevel=4
#################################
# master Act as a master
#
# master=yes
#################################
# max-queue-length Maximum queuelength before considering situation lost
#
max-queue-length=5000
#################################
# max-tcp-connections Maximum number of TCP connections
#
# max-tcp-connections=10
#################################
# module-dir Default directory for modules
#
module-dir=/usr/lib/powerdns
#################################
# negquery-cache-ttl Seconds to store packets in the PacketCache
#
# negquery-cache-ttl=60
#################################
# only-soa Make sure that no SOA serial is less than this number
#
# only-soa=org
#################################
# out-of-zone-additional-processing Do out of zone additional processing
#
# out-of-zone-additional-processing=no
#################################
# query-cache-ttl Seconds to store packets in the PacketCache
#
query-cache-ttl=20
#################################
# query-logging Hint backends that queries should be logged
#
query-logging=yes
#################################
# queue-limit Maximum number of milliseconds to queue a query
#
queue-limit=1500
#################################
# query-local-address The IP address to use as a source address for sending
# queries.
# query-local-address=
#################################
# receiver-threads Number of receiver threads to launch
#
# receiver-threads=1
#################################
# recursive-cache-ttl Seconds to store packets in the PacketCache
#
# recursive-cache-ttl=10
#################################
# recursor If recursion is desired, IP address of a recursing nameserver
#
recursor=127.0.0.1:5353
#################################
# setgid If set, change group id to this gid for more security
#
setgid=pdns
#################################
# setuid If set, change user id to this uid for more security
#
setuid=pdns
#################################
# skip-cname Do not perform CNAME indirection for each query
#
skip-cname=no
#################################
# slave Act as a slave
#
slave=yes
#################################
# slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds
#
slave-cycle-interval=30
#################################
# smtpredirector Our smtpredir MX host
#
# smtpredirector=a.misconfigured.powerdns.smtp.server
#################################
# soa-minimum-ttl Default SOA mininum ttl
#
# soa-minimum-ttl=3600
#################################
# soa-serial-offset Make sure that no SOA serial is less than this number
#
# soa-serial-offset=0
#################################
# socket-dir Where the controlsocket will live
#
socket-dir=/var/run
#################################
# strict-rfc-axfrs Perform strictly rfc compliant axfrs (very slow)
#
# strict-rfc-axfrs=no
#################################
# urlredirector Where we send hosts to that need to be url redirected
#
# urlredirector=127.0.0.1
#################################
# use-logfile Use a log file
#
use-logfile=yes
#################################
# webserver Start a webserver for monitoring
#
webserver=yes
#################################
# webserver-address IP Address of webserver to listen on
#
webserver-address=0.0.0.0
#################################
# webserver-password Password required for accessing the webserver
#
# webserver-password=
#################################
# webserver-port Port of webserver to listen on
#
webserver-port=5555
#################################
# webserver-print-arguments If the webserver should print arguments
#
# webserver-print-arguments=no
#################################
# wildcard-url Process URL and MBOXFW records
#
# wildcard-url=no
#################################
# wildcards Honor wildcards in the database
#
# wildcards=
#################################
# version-string What should PowerDNS return for version
# allowed methods are anonymouse / powerdns / full / custom
version-string=powerdns
include=/etc/powerdns/pdns.d
